Sanitizer 250ml

DESCRIPTION
A high foaming, acid based, no-rinse sanitizer. Designed for use on food contact surfaces, this acid and anionic detergent blend provides a synergetic killing system with a broad spectrum bactericidal and fungicidal action. The high foaming nature of the solution provides an effective sanitizing foam, making it ideal for hand application as well as soaking. Ideal for use in breweries, dairies and other food manufacturing environments, where daily use will leave equipment sanitized and in an acid state, which will eliminate water spotting. May also be used as a milk stone and scale remover.
DIRECTIONS FOR USE
Ensure all surfaces are clean and free from soil before sanitizing. Dilute at a rate of 15ml per 10L of water (1:665). Allow a 1-2 minute contact time for effective sanitization.  After draining of the solution, no rinsing is required. For part soaking, allow contact for 30 seconds with the solution and apply parts wet. For utensils, soak or spray with the prepared solution and allow 1-2min contact time. For bulk tanks, vats or equipment, apply the solution to all surfaces via manual spray, brush or soak and drain after 1-2min contact time. Higher dilution rates will require a potable water rinse if used on food contact surfaces.
Solution must maintain a pH of below 3 to be effective. If clouding occurs replace the solution or add phosphoric acid to lower the pH. Replace the solution if it becomes soiled or dirty.
STORAGE : Keep in a cool, dry and well ventilated area at ambient temperatures.
CAUTION : Keep out of reach of children. Avoid contact with skin and eyes.
FIRST AID MEASURES
Eye Contact: May cause irritation. Flush with plenty of water and seek medical attention if required.
Skin Contact: May cause irritation. Wear protective gloves if required. Wash with water.
Ingestion: May cause nausea and vomiting. Do not induce vomiting, drink plenty of water and seek medical attention.
NOTE:
The information provided is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.